The Professor







Steam Punk Chair

After a couple of weeks of fiddling with this figure over the school holiday's it's finally taking shape and I'm fairly happy with the direction it's taking. I have all the main shapes including the figure worked out and am now happily adding details in the form of cogs, pipes etc to it. Sadly the new term beckons so it will take a while to finish. Always te way, you get into a piece after a bit of struggling and then have to leave it!



Below you can see the chair waiting for the figure to be slotted in. It has just had plastiroc padding added to the arms and some plastic neds removing and spraying but you can see the display console which I really like, made from 2 brass rods threaded through various bits of plastic. It even swivels.
You can also see the green tubing which will go into the figures back which I removed from some piece of medical equipment I found which has a suitable mad scientist look.
I've yet to add all the cogs and gears below te figure. Sadly I hadn't given tis any thought until well into the making but I realised it really needed the complexity of these showing to give it the look I wnated. As a result on careful examination the fianl piece will look totally impractical.
It has given me the urge to create some more mechanical automata though. I fancy a steam punk race car next as I really enjoy making these retro looking macines.
I have considered adding a mechanical hand to the chair, but again as this is an afterthought not sure how to add it. The photo below is of a figure I started last year but never finished. I may use the design of his claw hand.
As I develop more of this kind of work it has become self evident that I need more planning and design work. Normally I have an idea and just start making, but these more complex mechanical forms don't come together so easily with this approach, to quote Xander Harris "Measure twice, cut once, for the longest time I tought it was the other way around"

chicken legs

The two legged chair (I've seen this called chicken legs, presumably because of the jointing, but I can't say that it gives the air of menace I wnat from this figure!) has finally got past the basic construction and is now taking on the character I wanted. The legs need a lot more detail and gears etc to give a steam punk feel and I hope to add more consoles and arms to the chair but you can see where it's going.
The chair has been covered in plastiroc modelled to look like padding. The boiler is bits of plastic I've found wrapped in strips of card studded with split pins, you can't see it but the boiler is covered with strips of masking tape which when stained will look like planking.
I found some coiled plastic tube which I plan to have coming out of the figures back like feeding tubes.
The figure is taking shape, he is a thin wire armature with almost no padding covered in tape to give him a gaunt skeletal look. He is awaiting a long coat and lots of straps and tubes.

steam punk cricketer

This was a modified version of my steam punk droid made as an xmas present for my cricket obsessed dad



2 legs easier than 6 (or is it 8?)

After a few attempts to make a spider legged base I just wasn't geting anywhere, mostly as it looked too bulky and didn't give the figure the precarious look I wanted. (I've since seen a lovely tripod design which would have been perfect)

Anyway keen to move on I sketched some designs based on animal legs, which look very much like Imperial walker legs because I guess that's where ILM got their design from, still looks good though.

I've used a basic mdf one piece leg which I'm adding too to give the effect I want. This was a quick and simple way of making the figure stand up so I could move onto adding the chair.
I need to figure out a way of creating some nice pistons so the legs look like they could function and add a boiler too the back of the chair. This will alos have lots of funky consoles and controls coming off it as well as some kind of foot support for the stooped figure. Not really sure how he will be finished, possibly lots of tubes coming off him.




Below are some images I found for inspiration. I love the metal jaguar by artist Andrew Chase
his work is amazing and well worth checking out.
























spider chair

The last few months have been a creative vacuum, too tired and cold and with no clear ideas to get engaged with. Now school hols are here I feel revived. I've had the idea of some kind of robotic chair for some kind and while sat doodling some head ideas during a cover lesson yesterday I came up with a clear idea of a thin little guy on a chair with lots of controls which moves around on spider legs. Kind of a Davros like figure judging by the eloctodes sticking out of his head (I'm fed up of top hats)



While making the chair I sat the driver in 2 poses, one as intended stooped over the controls sat vertical, (as seen below) another with him led back in a more racing car pose. I like this second idea but was worried it was too much like the racers in Phantom Menace, maybe I'll make both.

automata delight

I was lucky enough to go to open house art exhibition today and saw some wonderful automata art work by Wanda Sowry who had opened her home for the day. I was greeted by two amazing automata on the hall wall and then a lovely cup of mulled wine (well mulled ribena as I was driving but it was still good). Wanda's automata can be seen by clicking on the image below.





Also on show were Robert Race's driftwood automata, very simple but so clever and effective. My personal favourite was a Trophy with moving eyes seen here (click to see more)


Both artists were really friendly and willing to share some their experience as well as let me take photos of their mechanisms. Wanda's skeleton figures have inspired me try a skeleton cricketer for my Dad's xmas present.



I've taken a break from the steam punk droid to finish a figure started over 2 years ago. The shape was there but he just needed a bit of work on the clothes and painting. Not sure why he was abandoned for so long but I like him. Perhaps once the call of automata has passed I will do some more like him as I haven't made this kind of work for years.

Should he wear a coat?

The droid is nearly done. A coat of paint and a few extra bits of scrap ahve made all the differnece. I'm really pleased with the new technique for making the coat too: it proves much easier to amke and more flexible to position.


I'm not sure if the figure needs it though, what do you think?




Steam punk droid nearly complete

I've spent the weekend spraying and putting a lot of the bits together so he is starting to look finished. I was worried that the top hat on it's own looked a bit odd, and that he looked like a reject droid from The Phantom Menace, so I've added a coat. I've tried making this out of paper and thin wire edging covered in masking tape. This has the benefit of being quicker and more flexible than the usual card I use. I'm reasonably happy with the result, it's certainly easier to change it's shape, but has minimal stength so no good for some other figures where the coat is part of the stucture.

The photos are not great but it was getting dark when I took these.






The ray gun has been shortened since last week. I found some good bits of plastic (an old pipe joiner I think) and really like the snub nosed look. I had a load of short thin straw like shapes (red) which make up the centre of the barrel. An old medical vile (courtesy as ever of the Scrapstore) filled with shower gel finsihes it off.

If you like Stteam punk ray guns check this video out from Doctor Grordbort's web site.