The Demolition Man

I wanted to do another gnome/dwarf figure where I made use of wire mesh to make clothing. This one took a while and spent a few months sat on my bench unsure of who he was but finally took shape....
I started with wooden shapes for the feet as this gives a strong and stable base. Galvanised wire is bent into shape for the body and fleshed out with cardboard and masking tape.

I'm going for a sort of gnome/dwarf look, so the slightly pissed off look is enhanced by a cigar from a piece of dowel and the goggles are pipe fittings, Ive coated them with pva and stained them with acrylic rather than spraying them (it was raining so couldn't go outside to spray) and this eems to be fine, in fact the acrlic adheres better than the normal spray I use.



The trousers are mesh coated in masking tape and white tissue paper. I like the baggy and crumpled look this gives.


His belly is built up from DAS, I apply a coat of pva to the armature before building this on, which help it adhere.
 



The armature for the arms was a bit bendy so the DAS has cracked a bit, next time I'll use thick brass for the arms as this is much more rigid. The body is coated in pva and then stained with brown acrylic.

I've given him a leather jerkin, studded with split pins,and bent to hang around his paunch. At this point I wasn't sure what he would hold, the original plan was for a large spanner but this obscured too much of the figure, so a thick piece of dowel with a piece of coarse string becomes a stick of TNT.

I found some lovely bits of blue transparent plastic in the scrapstore which makes up the barrel of a ray gun.




His napsack is from shaped wire mesh and all the belts and staps are parcel paper coated with masking tape.


Lots more TNT. I opted for a subtle shade of parchment rater than the iconic orange to give it an old fashioned look.



The spanner, originally intended for his hands slips nicely into the straps over his shoulder, giving him a nice busy look from behind.




The hair was a lucky accident. It's stained artist sponge which had slowly fallen apart from overuse. It looks great as hair and really adds to the look I was trying to create (Mad Max, steampunk gnome). It took a while to recreate the look of the original bits but I will be using this technique again.




Sir Pembroke-Smythe, explorer and adventurer.

It's been a while since I've posted any work here, partly because I find facebook easier to use but also because I've just not been feeling very creative lately. A couple of half complete pieces have been sat glaring back at me which hasn't helped either. Normally when I need a creative kick start I cleanup my studio as a tidy space helps me work and in the process I often find odd unfinished work that sparks ideas, plus a trip to the scrapstore will provide exciting treasure for stimulating the creative juices.

I found this sculpey head which was originally going to be a tall thin mad scientist and decided to create a short fat British general with skinny legs. I think the idea may have come about as I'm reading the Flashman books. The wooden clock face courtesy of the scrapstore seemed an ideal base.




As I started to build the basic armature he slowly evolved into a skinny old figure in an oversized robotic suit. I always like making weird steampunk type suits and this one has been floating around my imagination for some time.

 
The basic shape is built up from thin corrugated card edged with copper wire. Once the shape is blocked out I take care applyong the masking tape as this provides the outer surface onto which I paint. Just like a suit of armour the suit is made up from individual segments as are the boots.


 







I use a lot of corrugated card as it is remarkably versatile, both flexible and strong. It's important to get the corrugated grooves running in the correct direction though. Here the line can be seen going in a vertical direction which allows te card to ben in a curve for the neckpiece. I gently rub the card over a rounded surface (the edge of my workbench) to get an even bend and the wire edging helps keep it in shape.








I wasn't happy with the finish on his body so I covered it with papier mache toi give a more even finish. The text of the ppaer will show trough the paint slightly giving an intersting finish.


 

I felt he needed a bit more interest so I've given him a mechanical arm made up from bits from my scrapbox. The hand is oversized, a mix of Hellboy and Umbrella Academy for inspiration here.


His powerpack is a joint section of plastic piping sporayed black with various funky bits added.
As he's taken shape his suit has become more of an environment/exoskeleton suit so Ive added bits of armour and protective plates, secured with split pins to act as rivets.

The paint job starts with a wash of yellow ochre rubbed into the textured surface. I then add shades of burnt umber stippled on and rubbed black with a paper towel to give an old rusty weathered look.

The steampunk 'tricorder' again made using stuff from the scrapbox and brass rod.




The finished sculpt.
More photos here.
By the way anybody else having problems uploading photos form their pc on blogger? I've had to do this on my ipad as the upload box won't let me access photos.





Creating a Wood Sprite

 
I thought I'd show the proccess of making a wood sprite head from fimo.
It starts with a rough drawing over which I twist thin galvanised wire to make the branches that come out of his head.

Tape and foils are used to bulk out the basic shape.
 
Fimo is worked into a flat shape and layed over the foil.
This is slowly pushed and worked into shape.
Two eye sockets are pushed in.


 

 
 Beads are used for the eyes and extra fimo is added to make up the face.

 



 The head is placed on a foil baking tray and fired for approx 15-20 mins at 130degrees. When it comes out it has a richer colour.

 

 
The foil is removed from the head, as this just provided support while I was sculpting.
You can see that the wire was also twisted into a hoop at the back for hanging.

 

Extra fimo is added to give  a clean finish. The fired surface is covered with vaseline to help bind the new and old. This is then re fired.


 

 

After the second firing thin strips of masking tape are wrapped around the branches.
I lay the tape on a piece of perspex and cut them with a knife.

 



 



 

Thin copper wire is also covered with thin strips of tape and coated with pva. This stops the tape unwrapping over time as it loses its stickiness. These will become tin branches or ivy.


 

The head and ivy are stained with burnt umber acrylic. The head is wiped back regularly with a soft tissue so the paint accumalates in the cracks giving a nice aged wood effect.


 


The ivy is wrapped around the head and a second coat of paint and PVA added to ensure  a good finish.

 

The Finished piece.

Treecreatures visit Glastonbury

I've just installed a blogger app on my iPad so I'm trying it out with a quick news update.
The photo below is of a collection of work from about 3 or 4 years ago which I called treecreatures or tree sprites.
I'm very pleased that they now have a new home on Glastonbury high street with Lilith of Avalon. It's a very cool shop stocking work by many reputable artists including The Frouds, and reputably patronised by Nic Cage who lives nearby!

It's my first time in ages selling any work so both excited that Maya, the owner, thinks my work is worth displaying and a little sad that so many pieces have left home.

I think the plan is for a window display which is very encouraging, so watch this space for a photo.