Mr Hyde

I was discussing with someone on Deviantart the idea of creating Steampunk characters based on well known novels. She suggested Oliver Twist. Fat too cute.. so Mr Hyde. I've already done a few doctor/scientist types so it seemed a good choice. Plus I wanted something with a big mechanical arm, a dangerous looking beast of a figure. I know Hyde is not mechanical but this is steampunk so lets assume that Jekyll's skill is not medicine but robotics; hence half man half machine.



Below are some pics to get me thinking (I've tried to include links to the artist's pages where possible):







I want to include some of my favourite elements such as a big Victorian greatcoat with shoulder cape, I used a plastic vial full of washing up liquid in my last figure's back and this would fit with Hyde, along with other mechanical bits in his back. Also a big mechanical arm dragging on the floor and big heavy boots all topped off with lots of straps and buckles.
I'm not sure about the face, goggles and respirator or a distorted human face, perhaps one side mechanical (terminator style)?

Steam Punk Gentleman finished







I had planned to show more images of this under construction but time was against me. I really wanted to get him finished before the school term saps my creative energy. Also I'm considering sending some saleable work to a new craft centre opening near Leicester so I need to create a few more imp heads. They are not hard but I will need to clear my desk which is a real mess with all the bits of junk etc from this figure.

Anyway I think this figure has worked well, I really like the bent body shape which shows off the cogs and a new idea (for me, but you see it in lots of Steam Punk work) which is a vial of liquid, actually washing up liquid! It's a bit yellow as I didn't have any green which would look better.
I'm really getting into the idea of lots of tubes and bits coming out of my figures. I've also added lots of bigger straps (a bit of an Edward Scissorhands influence here) to suggest that his coat has to be strapped over a mechanical body, and who knows how human he is under all that leather?
I would love to try one of these figures in metal or maybe clay (I have no skill or facilities here for the former) or even leather. I want to simplify the materials to make more of the body shape, for example 3 pieces of metal joined togehter for this would I think be great. I could make more use of the construction techniques eg bolts to hold the 3 pieces toghether would enhance the effect. I remember seeing a sculptor's work in Bristol many years ago who made big metal sculptures of robed figures using very simple styalised shapes: a mix of monk and 3D Klimt. I have some pics somwhere which I must uncover.
Will have to give this more thought as I want to create something more resilant. the card and mixed media sculptures look good but are very fragile.

more mechanical figures

One of the things I enjoyed creating with my last couple of figures was the mechanical bits coming out of their backs and the robotic arm. I have a few ideas for developing this, one is a bulky cyborg type figure, possibly a mechanical Mr Hyde, another is a development of the wheel chair bound figures, but this time with a smaller seat actually built into a giant robot, possibly with a wizened old man driving it.
However with school holidays nearly over and the restrictions work place on actually making anything complex I came up with a simpler figure of a bent old man with mechanical bits coming out of his back. This figure was originally inspired the electric cables coming out of the back of a piece by Stephane Halleux, I liked the body shape too. (kind of reminds me of Belleville Rendez-Vous)

Over the next few posts I thought it would be helpful to explain how I make a sculpture.

Here you can see the basic body taking shape. It is just a basic cardboard shell roughly taped with masking tape. I use quite thin corrugated card which is very flexible. The corrugations allow it to bend nicely in one direction, in this case they go upwards so the shape curves towards the rear. I sometimes score the card if I want it to flex in more than one way.
It takes a bit of playing to get the shape exactly as I want it but once I'm happy I reinforce with gaffa tape. The top of the shape which will become the hole in his back is reinforced with florist wire.
Here you can see two plastic shapes for goggles bound onto a piece of wire for the neck with a bit of newspaper to pad out the chin. I've used two bits of flexible palstic tube for arms with stiff wire inside so they can be bent into shape. I normally use rolls of card but I found this and thought it would look good for him to have thin arms.


Because the figure leans forward he kept falling over so I slit open the back and packed it with a lump of clay moulded to fit.


I've skipped a bit here to show the figure nearer its final incarnation with bits of plastic and cogs just poking out of his back. I had originally planned for him to be pushing some kind of cart with cables coming out but I like these slightly claw like walking sticks. They are just slotted into the arms so may change.



Complete automata


















almost complete automata


I've now started to sculpt and add detail to the figure. All the actions work but it is clear that although I've learnt a lot about making mechanisms the final piece just doesn't have enough movement to make it interesting. At the very least the cogs in his back should move. Also I'm not happy with the the head movement.
Another day or so should see him complete. He will look nice static anyway!
I also now have more inspiration for another (static) old man figure with a mechanical back.


steam punk wheel chair automata mechanism

After a week of battling with various types of mechanism I've finally got it all working and I'm feeling rather good about the end product.
The big challenge was making a movement for the back of the wheelchair, and it was clear that I'd have to use cogs. So far I've had little success with these but as they are an essential part of most automata I realised I'd have to figure out how to make them.

Using wheels with pins seemed the best way as I knew I could make these fairly precise.
As you can see I made a simple jig (just the toothless cog set into a block of wood on its axle) to ensure each pin hole was the correct distance from the centre.


The cog on the main axle turns the cog at right angles to it for the back mechanism. I spent about 8 hours getting this to actually work. It kept jamming, after various changes I realised the gears were not close enough: you can see a bit of wood slotted behind the cog to push it gently against the other one. Success!!!!!

This allowed me to add another movement in the wheel chairs back, it doesn't have a function other than to look nice. I did want a flywheel in the back but it was too complex and would have involved major changes to the chassis, which already needed a hole added for the up and down piston. I will eventually add something to the other end.
Once the movements were sorted some cosmetic work was needed on the figures arm and the back area.

The back had a selection of fake cogs and bits added, inspired by some clock insides, I would have loved to make this all move, maybe next time.

I had a basic arm movement and was happy that it worked well but it looked wrong. I could have gone for a very stylised figure and made use of the joints as part of the look but it didn't feel it would go with the rest of the figure. I hit upon the idea of a robot arm, after all he is built into a steam powered wheel chair!

The arm still need a bit of work cosmetically but it works fine.
Now I have all the movement sorted I can work on sculpting the figure. It will be inspired by the last figure, my steampunk technomancer but not a copy. The challenge will be to allow some bits to be removable in case I need access to the movement inside. I also want to try using real leather but we shall see.
I've learnt a lot from making this, not least the importance of careful planning, and perseverance has payed off as you can see from the video which shows some of the main movements.


automata mistakes

I am now in new territory so have spent a lot of time building and rebuilding mechanisms. I have been trying to discover the best way of getting everything to work off the main axle and lack of knowledge means trial and error (helped by a great little book 'Cabaret Mechanical Movement' from Paul Spooner's web site). I haven't helped myself by not having a clear idea of what I want to do. I have used a bell crank (which in this case turns a vertical movement into an horizontal one, with the intention of making the figures head turn from side to side.




One thing I've learnt is that trying an idea out in card using split pins for joints really helps visualise the end product. I've then moved onto making a simple version using florist wire (you can see this in the head mechansism). As you can see this is a bit of a rough version but it does work. I can now rework it to improve strength and smoothness of movement.

One thing I am pleased with is the change in speed from the wheel spinning in the background to the gentle left to right head movement. That was a total flook!

Saw a great quote from the director of Toy Story 3 who was discussing the experimental approaches they use to create Pixar movies: "Screw-ups are an essential part of making something good. That's why our goal is to screw up as fast as possible"

New Automata

As it's been positively autumnal today I've spent the entire day on the new automata. The aim is to learn some new skills and work out how to use more types of mechanism. The automata will be loosely based on my last sculpture of a steampunk wheelchair but will no doubt change as I try at new ways of making the thing work,

Today I've built a basic frame and a mechanism to make the wheels turn. I was admiring the work of Keith Newstead who often makes all the movements originate from the wheels which are on rollers (check this video out). This seemed like a good idea and a fun challenge. My main problem was creating a smooth action where the wheels meet the rollers, if this isn't ok then the whole thing fails. I tried various wooden wheels but it quickly became clear that my cutting skills were not accurate enough; cutting a perfect circle is really hard, ask Giotto and he only had to draw one!
So I opted for using plastic bits I had in my junk box. I think they actually look better than the wooden ones anyway, you can see both versions in the photo. The rollers are covered in a piece of soft textured foam for traction.

Once this was worked out I cut a basic frame and base onto which everything else can go. The next problem is how to make the wheel movement operate the engine. I had planned to use an elastic drive from the wheel shaft to the next mechanism, but this just doesn't seem to have enough traction. So it will need a cog or crank on the wheel shaft. That is a problem for another day.

Steam Punk Technomancer











steam punk wheel chair necromancer

Nearly finished now. At stage of adding details and painting as you can see form these shots. I am not sure about the face itself though; I've abandoned the idea of a breathing tube and at the moment it looks skull like which is unintentional it was just the shape I sculpted to attach the mask to but it has potential. Also I've added a new eye piece based on something I saw on deviantart which I think looks kind of scientific.